A Solar Panel and Charge Controller will Charge your House Batteries if Positioned in the Sun. The Solar Kit for RV San Diego are Available in 100 Watt Kits, 150 Watt Kits , 200 and 300 Watt Kits.
Complete Solar Kits for Trailer, RV, Overland camping, Sprinter and Marine will help recharge your 12 volt house bank during the day and make them last longer. Batteries are less likely to sulfate as quickly when receiving a daily charge vs left off charge.
The charge controller included in the solar kit will reduce the voltage collected from the panel and reduce it so not to overcharge the batteries and an ideal fit for RV rooftops with limited space for installation.
The Solar RV Kits Come with Mounting Brackets, Charge Controller and PV Wire to mount inside your vehicle.
Of course DIY is good but if not familiar with installing solar and electrical, we recommend hiring a professional install.
We have several mobile techs who can visit you and install the solar kit.
Solar Installer Referrals for San Diego:
Clay (760) 822-8703 at Elite Services – Horse Trailers, Diesel Pushers, Fifth Wheels serves all San Diego. Blue Sky Charge Controller Expert
Abe (760) 802-3238 at RV Mobile Service 2U – Expert on Everything Airstream. Serves all San Diego and farther north
Vince (619) 381-9382 at AEM RV Service – Campers, Diesel Pushers, Fifth Wheel Service serves all San Diego
Windy Nation Solar Kit for RV and Marine For Sale and Ready to Install.
30A Controller Solar Kit for RV San Diego Prices Plus Tax:
100 Watt Solar Kit Price: $ 259.50 (Compare to Renogy Solar)
150 Watt Solar Kit Price: $ 280.50
200 Watt Solar Kit Price: $ 348
300 Watt Solar Kit Price: $ 510
Flexible Solar Panel Kit for Sale
100 Watt Flexible Solar Panel without Controller Price: $219.75
100 Watt Flexible Solar Panel Kit w/ 30A Controller Price: $283
Looking to Upgrade Solar Charge Controller? We Like Blue Sky
Because they are Great, Local and Awesome Tech Support
Sizing a Solar Kit for Deep Cycle Batteries
100 Watt Solar Kit will maintain (float) one to two 12 volt deep cycle batteries 80-100 ah ea
100 Watt Solar Kit will only maintain (float) two 6 volt deep cycle batteries and not recover from 50% DOD
Two 285 Watt panels wired in series Watt Solar Kit will recharge two 6v 220 ah at 50% DOD in 6 hours
Four 285 Watt panels wired in series Watt Solar Kit will recharge two 6v 220 ah at 50% DOD in 3.5 hours
The Solar Kit for RV San Diego will get you starter on making your batteries to last longer dry camping.
The solar panels and controllers have a one year warranty
Going Off Grid and Need an Inverter to Go With Your Solar Kit for RV San Diego?
1500 Watt Pure Sine Windy Nation Inverter with 3000 Watt Surge
Windy Nation Inverter 1500 Watt Pure Sine
PURE SINE WAVE 1500 Watt Price $ 236 ea
(3000W Surge) 12V Power Inverter DC to 115 AC Car, Solar, Off-Grid, RV, Back Up Power – One Year Warranty
3000 Watt Pure Sine Windy Nation Inverter with 6000 Watt Surge
Windy Nation Inverter 3000 Watt Pure Sine
PURE SINE WAVE 3000 Watt Price $ 436.80 ea
(6000W Surge) 12V Power Inverter DC to 115 AC Car, Solar, Off-Grid, RV, Back Up Power – One Year Warranty
Inverter Wire Kit ANL Fuse Holder and 150A Fuse
ANL Fuse Holder with 30 Amp Fuse Price: $15.99
ANL Fuse Holder with 60 Amp Fuse Price: $15.99
ANL Fuse Holder with 150 Amp Fuse Price: $15.99
ANL Fuse Holder with 250 Amp Fuse Price: $15.99
ANL Fuse Holder with 300 Amp Fuse Price: $16.99
The ANL Fuse Holder and fuses are used in solar electrical systems in which the fuse is designed to fail first when the current exceeds the safe limit for the device being protected by the fuse. It is the end user’s responsibility to determine the appropriate fuse size for the electrical circuit. In general, the fuse should be sized at approximately 1.30 times the rated power of the device being protected by the fuse.
- Includes 1pc of ANL Fuse Holder + ANL Fuses
- ANL fuse holder will accept up to a maximum of 2/0 gauge cable with 5/16 lug id
- ANL Fuse Holder mounting bolts are 8 mm in diameter. Use cable terminals with a 5/16″ diameter or 8 mm diameter mounting hole to achieve a proper connection
- For most applications, the fuse should be sized at approximately 1.30 times the rated power of the device being protected by the fuse
200 Amp Inverter Installation Kit for 1500 Watt Inverter
The Inverter Installation Kit contains a pair (one black and one red) 2 AWG 600 volt welding cable and one ANL fuse holder and fuse.
that is used to connect the inverter to the battery bank.
The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.